How do I check Drive S.M.A.R.T status in Genesis ZX?

To check the S.M.A.R.T status of the drives in your Genesis ZX you will have to gather the support logs and look through the "smart_data.log.

 

1. Log into your Genesis ZX web GUI by typing its IP address in a web browser that is on the same network as the Genesis ZX. Password is "admin" by default.

2. Once logged in navigate to "Diagnostic > Logs" and click on "Download all", it should take a few minutes to download the logs.

3. Once downloaded untar the file and navigate to "LOGS" and scroll down until you see "smart_data.log". Open this file to see the S.M.A.R.T data on your drives.

Joey Herzan
2019-03-01 18:28